KT
Publications
- Partial Discharge Diagnostics: Data Cleaning and Feature Extraction
- Online Estimation of Power Capacity With Noise Effect Attenuation for Lithium-Ion Battery
- A Physics-Based Compact Model of SiC Junction Barrier Schottky Diode for Circuit Simulation
- Micro PMU based monitoring system for active distribution networks
- Smart lighting system using ANN-IMC for personalized lighting control and daylight harvesting
- Experimental Comparison of High-Speed Gate Driver Design for 1.2-kV/120-A Si IGBT and SiC MOSFET Modules
- Comparison of SiC voltage source inverters using synchronous rectification and freewheeling diode
- A Practical Lithium-ion Battery Model Based on the Butler-Volmer Equation
- Real-time integratable isolated voltage monitoring unit of semiconductor power switch to improve power converter reliability
- A Simulation Study on a Thermoelectric Generator for Waste Heat Recovery from a Marine Engine
- Magnetic Integration of Three-Phase LCL Filter with Delta-Yoke Composite Core
- Full coverage of optimal phasor measurement unit placement solutions in distribution systems using integer linear programming
- Design and Demonstration of High Power Density Inverter for Aircraft Applications
- Evaluation of power loss and efficiency for 50 kW SiC high power density converter
- Intelligent Street Lighting for Smart Cities
- A Practical Lithium-Ion Battery Model for State of Energy and Voltage Responses Prediction Incorporating Temperature and Ageing Effects
- Loss-of-life investigation of EV batteries used as smart energy storage for commercial building-based solar photovoltaic systems
- Online model identification and state-of-charge estimate for lithium-ion battery with a recursive total least squares-based observer
- Study of applied pressure on open circuit characteristics and capacity of lithium polymer pouch cells
- A Digital Method of Power-Sharing and Cross-Regulation Suppression for Single-Inductor Multiple-Input Multiple-Output DC-DC Converter
- Demonstration of 6kW/kg 50kW grid facing power converter for future aircraft
- Partial discharge simulation and detection in 750v DC XLPE cables
- Comparison of pin-fin and finned shape heat sink for power electronics in future aircraft
- Toward Joint Compression-Transmission Optimization for Green Wearable Devices: An Energy-Delay Tradeoff
- Circulating Current Suppression in Modular Multilevel Converters With Even-Harmonic Repetitive Control
- A high-fidelity hybrid lithium-ion battery model for SOE and runtime prediction
- A Pragmatic SOH and SOC Co-Estimator for Lithium-ion Batteries in Smart Grid Applications
- Performance analysis of machine-learning approaches for modeling the charging/discharging profiles of stationary battery systems with non-uniform cell aging
- Modelling and control of vanadium redox flow battery for profile based charging applications
- An Accurate Subcircuit Model of SiC Half-Bridge Module for Switching-Loss Optimization
- Virtual storage capacity using demand response management to overcome intermittency of solar PV generation
- Online State of Charge and Capacity Dual Estimation with a Multi-timescale Estimator for Lithium-ion Battery
- Demonstration of a 50 kW and 100 kHz SiC high power density converter with gate assisted circuit
- Review on application of additive manufacturing for electrical power converters
- Transient thermal analysis of SiC high power density inverter
- Demonstration of a 50 kW and 100 kHz SiC high power density converter for aerospace application
- A multi-timescale estimator for battery state of charge and capacity dual estimation based on an online identified model
- Analysis and design of coupled inductor and output harmonic filter for interleaved three phase VSCs
- A high-fidelity hybrid lithium-ion battery model for state of energy and circuit characteristics prediction
- Comparative study of methods for integrated model identification and state of charge estimation of lithium-ion battery
- Demystifying Thermal Comfort in Smart Buildings: An Interpretable Machine Learning Approach
- A Non-Invasive On-line Condition Monitoring and Health Prognosis System for a Remote Islanded Micro-Grid
- An adaptive model for vanadium redox flow battery and its application for online peak power estimation
- Towards City-integrated Distributed Generation: Platform for Interconnected Micro-grid Operation (PRIMO)
- A 50-kW High-Frequency and High-Efficiency SiC Voltage Source Inverter for More Electric Aircraft
- Design of high-speed gate driver to reduce switching loss and mitigate parasitic effects for SiC MOSFET
- PMU Placement for Measurement Redundancy Distribution Considering Zero Injection Bus and Contingencies
- MPC Based Dynamic Voltage Regulation Using Grid-Side BESPS With the Consideration of Communication Delay
- Optimum Placement of Phasor Measurement Units in Power Systems
- iTCM: Toward Learning-Based Thermal Comfort Modeling via Pervasive Sensing for Smart Buildings
- User interface model for microgrid systems monitoring: From user needs to design requirements
- Impact of demand response management on chargeability of electric vehicles
- Study of the influencing factors on the discharging performance of lithium-ion batteries and its index of state-of-energy
- Application of integral reinforcement learning for optimal control of a high speed flux-switching permanent magnet machine
- State estimation for distribution systems using micro-synchrophasors
- Inductively coupled modular battery system for electric vehicles
- Design considerations for ELVDC power distribution system integrated directly with DC energy sources for LED lighting in high-rise built environment
- A novel analysis and design method of phase lead filters in repetitive controllers for pulse-width modulated inverters
- Review of high speed electrical machines in gas turbine electrical power generation
- Design of energy storage scheme for the smoothing and dispatch planning of large-scale wind power generation
- An equivalent circuit model for state of energy estimation of lithium-ion battery
- Investigation on weight consideration of liquid coolant system for power electronics converter in future aircraft
- Modelling technique utilizing modified sigmoid functions for describing power transistor device capacitances applied on GaN HEMT and silicon MOSFET
- Impulsive noise reduction for transient Earth voltage-based partial discharge using Wavelet-entropy
- Design of stand-alone thermoelectric power generation system for marine engine exhaust system
- Design and comparative analysis of a driverless LED lighting system and its centralized dimming scheme in high-rise built environment
- Selection of unit cell size for RF energy harvesting metaresonator array
- Online junction temperature estimation of IGBT modules for Space Vector Modulation based inverter system
- Fracture characterization of glass fiber composite laminate under experimental biaxial loading
- Dynamic model predictive voltage control for single-input dual-output flyback converter
- An accurate subcircuit model of SiC half bridge module for switching loss optimization
- Review of design and challenges of DC SSPC in more electric aircraft
- Design considerations and comparison of high-speed gate drivers for Si IGBT and SiC MOSFET modules
- Performance study of a Vanadium Redox Flow Battery (VRB) for use in green data centers
- Hybrid approach based on global search algorithm for optimal placement of μPMU in distribution networks
- An electrical model capable of estimating the state of energy for lithium-ion batteries used in energy storage systems
- Electromagnetic design and optimization analysis on an embedded segmented rotor flux switching machine
- Customized optimal μPMU Placement method for distribution networks
- FEM modelling of three-phase common mode choke for performance evaluation
- An equivalent circuit model for Li-ion batteries used in energy storage systems in building environment
- A novel gate assisted circuit to reduce switching loss and eliminate shoot-through in SiC half bridge configuration
- A line to ground fault detection technique for ELVDC distribution system in built environment
- Condition monitoring system of Ubin Island micro-grid
- Harmonic mitigation of hybrid AC/DC micro-grids with PMSG
- Comparative analysis of flux switching machines between toothed rotor with permanent magnet excitation and segmented rotor with field coil excitation
- State of charge estimation considering OCV hysteresis in lithium iron phosphate battery for UPS applications
- An IoT-oriented data storage framework in smart city applications
- Even-harmonic repetitive control for circulating current suppression in Modular Multilevel Converters
- Online electro-thermal model for real time junction temperature estimation for insulated gate bipolar transistor (IGBT)
- High accuracy and resolution illuminance sensing for intelligent energy management
- Switching characterization of SiC half bridge module for high power density converter
- Enhanced online model identification and state of charge estimation for lithium-ion battery with a FBCRLS based observer
- Online state of charge and model parameter co-estimation based on a novel multi-timescale estimator for vanadium redox flow battery
- A 99% efficiency SiC three-phase inverter using synchronous rectification
- An extra low voltage DC (ELVDC) power distribution for LED lighting system
- Condition Monitoring and Reliability Analysis of Power Systems for Underground Cavern Facilities
- Lumped magnetic circuit model for faulty machine performance prediction
- Adaptive estimation of state of charge and capacity with online identified battery model for vanadium redox flow battery
- Preliminary investigation of electromagnetic and thermal performance of closed stator switched reluctance machines
- Efficiency evaluation of coordinated charging methods used for charging electric vehicles
- Distributed Moving Horizon Estimation for power systems
- A high frequency isolated current-fed bidirectional DC/AC converter for grid-tied energy storage system
- Design and modelling of grid-connected PMSG-based wind energy conversion through diode rectifier, DC/DC and DC/AC converters
- Assessment of climate-based daylight performance in tropical office buildings: A case study
- Cascaded sliding mode control for global stability of three phase AC/DC PWM rectifier with rapidly varying power electronic loads
- Characterization of vertical Mo/diamond Schottky barrier diode from non-ideal I-V and C-V measurements based on MIS model
- Development of a one-dimensional thermal-electrochemical model of lithium ion battery
- Comparison of power cycling and thermal cycling effects on the thermal impedance degradation in IGBT modules
- Design of AlN-based micro-channel heat sink in direct bond copper for power electronics packaging
- Towards a Fault-Tolerant grid interface system for DC power distribution networks in Green Buildings
- Minimum mass design of thin tubular structures under eccentric compressive loading
- Evaluation on filter topologies in high power density converter design for power quality and EMI control
- Parametric study on the performance of double-layered microchannels heat sink
- Gate driver optimization to mitigate shoot-through in high-speed switching SiC half bridge module
- Temperature dependence of capacity decay due to ion diffusion in vanadium redox flow battery
- Energy efficiency of lithium-ion battery used as energy storage devices in micro-grid
- Space vector pulse-width modulation for single-phase full-bridge Z-source inverter
- Design and control of a novel flywheel energy storage system assisted by hybrid mechanical-magnetic bearings
- Design and evaluation of a new converter control strategy for near-shore tidal turbines
- Frequency control ancillary service provided by a wind farm: dual-BESS scheme
- Power electronic-based protection for direct-current power distribution in micro-grids
- Double star chopper cell converter for battery electric vehicles with inter-module SoC balancing and fault tolerant control
- Intertied ac-ac microgrids with autonomous power import and export
- Development of efficient air-cooling strategies for lithium-ion battery module based on empirical heat source model
- Cooperative operation of chemical-free energy storage system with solar photovoltaic for resilient power distribution in buildings-A case study
- Design and evaluation of a tidal in-stream generator power port
- Challenges in switching waveforms measurement for a high-speed switching module
- Weight consideration of liquid metal cooling technology for power electronics converter in future aircraft
- Conducted EMI prediction of the PFC converter including nonlinear behavior of boost inductor
- Applying VRB-ESS in the DC micro-grid for green building electricity supply: Constructive suggestions to improve the overall energy efficiency
- Reliability evaluation of electric power systems with solar photovoltaic & energy storage
- Improved lithium-ion battery model with hysteresis effect
- Electro-thermal modeling of SiC power devices for circuit simulation
- An energy efficient 48Vdc bipolar ELVDC LED lighting system in a high-rise building
- Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies
- Inter-module state-of-charge balancing and fault-tolerant operation of cascaded H-bridge converter using multi-dimensional modulation for electric vehicle application
- A universal controller for grid-tied DC/AC converters for harnessing PV panel based solar energy and PMSG based wind energy
- WSN-based intelligent visual performance management in tropical buildings
- Extended dynamic model for ion diffusion in all-vanadium redox flow battery including the effects of temperature and bulk electrolyte transfer
- Wavelet based fault tolerance in grid interface system for DC power distribution network
- Modeling and sensorless direct torque and flux control of a dual-airgap axial flux permanent-magnet machine with field-weakening operation
- Investigation on the Influence of Nanofluids in Wavy Microchannel Heat Sink
- Design of high power density converter for aircraft applications
- System design for the building-integrated microgrid test-bed - A case study
- Heatsink design for high power density converter in aircraft applications: Parameter sensitivity analysis
- Operational adequacy studies of a PV-based and energy storage stand-alone microgrid
- Design and optimization of planar mesa termination for diamond Schottky barrier diodes
- Integration of multiple modularized distributed energy resource devices into AC grid of buildings: Issue of active power circulation
- An approach for on-line electrical machine winding inter-turn fault detection
- A battery cell equalizer with continuous charging current for energy storage system
- Cruciform specimen design for biaxial analysis of composite material
- Development of a lifetime model for VRLA batteries used in wind turbine generators
- Effect of inclined angles on the mixing of turbulent supercritical water in a T-junction
- Tidal in-stream generation with improved PCC voltage profile
- Statistical voltage quality assessment method for grids with wind power generation
- Message from technical programme chairmen
- Modelling of battery temperature effect on electrical characteristics of Li-ion battery in hybrid electric vehicle
- SCWR single channel stability analysis using a response matrix method
- Determination of a dispatch strategy to maximize income for a wind turbine-BESS Power Station
- An energy-efficient low voltage DC grid powered smart LED lighting system
- Optimization of battery energy storage system with super-capacitor for renewable energy applications
- Power buffer with model predictive control for stability of vehicular power systems with constant power loads
- Energy-aware wireless sensor network with ambient intelligence for smart LED lighting system control
- Model predictive control of a novel axial flux permanent magnet machine for flywheel energy storage system
- Life cycle assessment of 50 MW wind firms and strategies for impact reduction
- Optimization of the VRB-ESS integrated hybrid power system for building applications
- A loop cancellation based active damping solution for constant power instability in vehicular power systems
- Thermal hydraulic behavior and efficiency analysis of an all-vanadium redox flow battery
- Comparison of axial flux permanent magnet machines with fractional and integral slot per pole
- Stiffness analysis and levitation force control of active magnetic bearing for a partially-self-bearing flywheel system
- A novel axial flux permanent-magnet machine for flywheel energy storage system: Design and analysis
- Position sensorless control of a novel flywheel energy storage system
- Multi-objective material selection for wind turbine blade and tower: Ashby's approach
- Switching characteristics of diamond-based m-i-p+ diodes in power electronic applications
- Comparison of axial flux PM synchronous motor and induction motor by mathematical and finite element analysis
- Comparison of different techniques for short term prediction of tidal current speeds
- Renewable energy integration into smart grids: Problems and solutions Singapore experience
- Design of a robust grid interface system for pmsg-based wind turbine generators
- Advanced control of series voltage compensation to enhance wind turbine ride through
- Long term prediction of tidal currents
- One-cycle controlled three-switch buck-type rectifier
- Determination of short-term power dispatch schedule for a wind farm incorporated with dual-battery energy storage scheme
- Nonhomogeneous-Nonequilibrium Two-Phase-Flow model for nuclear reactor Single-Channel stability analysis
- Modeling and position-sensorless control of a dual-airgap axial flux permanent magnet machine for flywheel energy storage systems
- PMSG based multi-generator architecture for wind generation application
- Elimination of reactive power in dual active bridge by hybrid of phase shift and PWM control
- Impact of energy storage and variability of PV on power system reliability
- Magnetic equivalent circuit modeling for interior permanent magnet synchronous machine under eccentricity fault
- Virtual resistance based active damping solution for constant power instability in AC microgrids
- Study on momentum interpolation methods with curvilinear collocated grids in single-phase and two-phase flows
- Maximum power extraction of tidal streams
- Analysis and comparison of axial flux PM synchronous motor and induction motor
- Dynamic study of a battery change-over scheme of a windfarm containing dual BESS
- Loss study of a novel axial flux permanent magnet machine
- Robust decoupling control of a three-link robot arm directly driven by permanent magnet synchronous motors
- On the modeling and control of a novel flywheel energy storage system
- Thermal-mechanical design of sandwich SiC power module with micro-channel cooling
- Control system design and implementation of a partially-self-bearing flywheel energy storage system
- Design and loss analysis of a high speed flywheel energy storage system based on axial-flux flywheel-rotor electric machines
- Sensor fault detection, isolation and system reconfiguration based on extended Kalman filter for induction motor drives
- Study on inrush current phenomenon in DC-DC converter with isolating transformer
- Stabilizing synchronization control of magnetic bearing-based flywheel energy storage systems
- Siting and sizing of distributed generation using three new indices
- Finite element analysis of a novel centrifugal induction blood pump
- Novel space vector based hysteresis current control (HCC) strategies for matrix converter
- A rule-based control strategy for matrix converters
- Development and control of a 3-axis motion simulator for satellite ADCS Hardware-in-the-loop Simulation
- A compact and efficient flywheel energy storage system with integrated magnetic bearings
- Finite element analysis of axial-gap induction motors
- Intelligent and Reliable Power Supply System for Small Satellites
- Maximum Torque Speed Tracking Control of IPM Synchronous Motor with State Observers and Load Torque Adaptive Estimation
- Modeling of AC-AC matrix converter for wind energy conversion system
- An efficient finite-difference-based newton-raphson method to determine intrinsic complex permeabilities and permittivities for Mn-Zn ferrites
- A tunable low-frequency piezoelectric phase shifter
- Design and FEM analysis of a flywheel energy storage system assisted by integrated magnetic bearings
- Generalized optimal trajectory control for closed loop control of series-parallel resonant converter
- FEM analyses for the design and modeling of a novel flywheel energy storage system assisted by integrated magnetic bearing
- New concept of multi-phase inductively-driven shaft-less centrifugal pumps
- Model-based predictive control for a compact and efficient flywheel energy storage system with magnetically assisted bearings
- Stiffness analysis and levitation force control of the active magnetic bearing for a partially-self-bearing flywheel system
- Stabilizing synchronization control of rotor-magnetic bearing systems
- Novel three-phase AC-AC Z-Source converters using matrix converter theory
- Reducing dielectric losses in MnZn ferrites by adding TiO2 and MoO3
- Optimum trajectory switching control for series-parallel resonant converter
- High-power, multioutput piezoelectric transformers operating at the thickness-shear vibration mode
- Effect of high permittivity and core dimensions on the permeability measurement for Mn-Zn ferrite cores used in high-frequency transformer
- A novel flywheel energy storage system with partially-self-bearing flywheel-rotor
- Modeling, simulation and analysis of conducted common-mode EMI in matrix converters for wind turbine generators
- Generalized optimal trajectory control for closed loop control of series-parallel resonant converters
- An observer-based robust adaptive controller for permanent magnet synchronous motor drive with initial rotor angle uncertainty
- A flywheel cell for energy storage system
- WRIG based wind conversion system excited by matrix converter with current control strategy
- Energy storage systems in distributed generation schemes
- Modeling of lithium-ion battery for energy storage system simulation
- Nonlinear control of interior permanent-magnet synchronous motor
- Piezoelectric transformer with high power density and multiple outputs
- A plate-shaped high power-density piezoelectric transformer with dual outputs
- Vibration distribution in output sections of a piezoelectric transformer operating at thickness shear mode
- Analyses and compensation of rotor position detection error in sensorless PM brushless dc motor drives
- Modeling and simulation of a disk-type permanent magnet bearingless motor
- Robust adaptive control of a three-axis motion simulator with state observers
- Determination of dimension-independent magnetic and dielectric properties for Mn-Zn ferrite cores and its EMI applications
- A self-bearing centrifugal blood pump based on induction motor with active and passive magnetic bearings
- A statistical approach to the design of a dispatchable wind power-battery energy storage system
- Feasibility study on inductively driven shaftless centrifugal pump for biomedical applications
- Study on reverse recovery characteristics of reverse-blocking IGBT applied in matrix converter
- Modeling and analysis of dual-output piezoelectric transformer operating at the thickness-shear vibration mode
- Controller design for variable-speed permanent magnet wind turbine generators interfaced with Z-source inverter
- Modeling of the dual-output piezoelectric transformer operating at thickness shear vibration mode
- Matrix converters for wind energy systems
- Nonlinear control of interior permanent magnet synchronous motor
- Experimental investigations into the effects of multi-segment structure on core losses in MnZn ferrites at high frequencies
- Basic algorithm of sensorless rotor position detection using fuzzy logic for the switched reluctance motor drives
- Issues in power diode modelling for circuit simulation
- Mitigation of conducted EMI in quasi-resonant dc-dc converters by frequency modulation
- Analysis of flux distribution and core losses in interior permanent magnet motor
- Robust adaptive control of a 3-axis motion simulator for instruments testing
- A disk-type bearingless motor for use as satellite momentum-reaction wheel
- Observer based robust adaptive control of PMSM with initial rotor position uncertainty
- Novel bearingless centrifugal blood pump
- Parameter identification and controller optimization using GA for a precision stage
- Modeling and robust adaptive control of a 3-axis motion simulator
- Synchronous reference frame based control of an unified power flow controller
- Novel compact PMSM with magnetic bearing for artificial heart application
- New structure transcutaneous transformer for artificial heart system
- New hybrid C-dump and buck-fronted converter for switched reluctance motors
- Control of energy optimized Dynamic Voltage Restorer
- Dynamic model of interior permanent magnet motor with skewed stator slots
- Novel and efficient free oscillating discrete TV power supply
- Modified charge-control equation for more realistic simulation of power diode characteristics
- Dynamic model of fluorescent lamp implemented in PSpice
- Development of a dynamic model of electric arc for power electronics simulations
- Effects of multi-Segment structure in core loss reduction of mnzn ferrite
- EMI suppression with switching frequency modulated dc-dc converters
- Design of a permanent-magnet direct-driven wheel motor drive for electric vehicle
- Analysis of flux distribution and core losses in interior permanent magnet motor
- A New Hybrid C-Dump and Buck-Fronted Converter for Switched Reluctance Motors
- Transcutaneous transformers in power supply system for an artificial heart
- Dynamic modeling of SRM including neighboring phase coupling effects
- Effects of multi-segment structure on core losses in MnZn ferrites at high frequencies
- Dynamic electric arc model for electronic circuit simulation
- An experimentally verified hybrid Cassie-Mayr electric arc model for power electronics simulations
- Computer-aided design and analysis of direct-driven wheel motor drive
- A novel compact PMSM with magnetic bearing for artificial heart application
- Observer-based robust adaptive control of PMSM with initial rotor position uncertainty
- Modified charge-control equation for simulation of diode reverse recovery
- Optimum Trajectory Switching Control for Series Parallel Resonant Converter
- Evaluation of neigh boring phase coupling effects of switched reluctance motor with dynamic modeling approach
- New mathematical models of metal halide lamps for ballast circuit design
- New structure transcutaneous transformer for totally implantable artificial heart system
- A VSS torque control strategy for multiphase PM brushless DC motor drive
- Performance Analysis of Single-Phase Line-Start Permanent Magnet Synchronous Motors
- A new structure transcutaneous transformer for artificial heart system
- Performance analysis of single-phase line-start permanent-magnet synchronous motor
- Using power diode models for circuit simulations - a comprehensive review
- PSpice model for the electrical characteristics of fluorescent lamps
- Analyses and compensation of rotor position detection error in a sensorless PM brushless DC motor
- A new method for accurate analytical modeling of switched reluctance motor
- A SRM variable speed drive with torque ripple minimization control
- Modelling of diode forward recovery characteristics using a modified charge-control equation
- Design of wheel motor using maxwell 2D simulation
- Performance of power diode model for circuit simulation
- Implementing power diode models in SPICE and Saber
- Modelling of power semiconductor devices for use in circuit simulations
- Accurate GTO model for circuit simulations
- Modeling of GTO thyristors using SPICE
- Servo performance of a BLDC drive with instantaneous torque control
- Instantaneous torque control
- Strategy for the Instantaneous Torque Control of Permanent-Magnet Brushless DC Drives
- DSP-based control of brushless DC drives for direct-driven robotic arms
- DSP-based instantaneous torque control in permanent magnet brushless D.C. drives
- Servo Performance of a BLDC Drive with Instantaneous Torque Control
- Intelligent indirect dynamic torque sensor for permanent magnet brushless DC drives
- Mathematical model of gate-turn-off thyristor for use in circuit simulations
- An Intelligent Indirect Dynamic Torque Sensor for Permanent Magnet Brushless DC Drives
- Digital Twin of Microgrid for Predictive Power Control to Building
- Digital Twin of Microgrid for Predictive Power Control to Buildings
- Full Coverage of Optimal Phasor Measurement Unit Placement Solutions in Distribution Systems Using Integer Linear Programming